Showroom: (See the map)
Ruko PALMYRA Square
Jl. Jalur Sutera 25A No. 32
Alam Sutera, Tangerang 15325
Banten - Indonesia
Phone: (+6221) 2931 4986, 2931 5026
Mobile: (+62) 812 9573 6760

Friday, August 18th, 2017 -  (UTC+7)

Advanced Search
Sepeda Kita
Home : Products : WHEEL : WHEELSET

AX Lightness U 45 Clincher

New road clinchers with 45 mm depth and 26 mm width: Wide, voluminous, aerodynamic! Tubular feeling, safety and weight with clincher wheels!


After an intensive development and test work now finally available:
Our ax-lightness U 45C (project name "Ultra Road Clincher 45") wheelset for clincher as well as tubeless tires.

With a technology based on our MTB clinchers, which has already extensively proven itself in the MTB WorldCup and caused quite a stir on the podiums, we now also enter the road scene with a dedicated clincher design.

An absolute featherweight on the scale at just under 1200 grams, which even in the tubular sector is only reserved for the absolute specialists, they are nonetheless really tough out on the road and as well sport the latest technological features. The rims come with a toroidal, 45 mm deep aerodynamic profile and boasts an enormous width of 26 mm. This allows for a more homogeneous transition to the mounted tire, which besides improved aerodynamics especially scores with its predictable handling in cross-winds and in gusts of wind. The massive internal width of 18 mm adds volume to the tire, resulting in larger contact patch which both increases the grip and damping of the tires, whilst per construction decreasing the rolling resistance. Herewith the rims are also especially suited for wider tires as currently trendy both in racing as well as in recreational riding.

As already established and proven with our MTB clinchers, the rim hooks are neither milled nor mechanically finished in any other way, but instead elaborately hand-laminated in a separate work step as one-piece with a continous fibre flow in and around the hook. That way the hook boasts a considerably higher strength and stability, which results in very good emergency running properties for instance upon a puncture: A wheel can thus still be ridden into the service zone without damaging the rim in MTB WorldCup racing. The pronounced ridge and clincher bulge at the same time provide a secure seat of the tire – another safety plus in case of a drop of air pressure.

As with our other rims our new 45 mm clincher rim also features our Spoke Reinforcement Technology (SRT), where each spoke hole is individually manually handcrafted and reinforced upon lamination and thus evades a subsequent drilling and therewith transection of fibres , which results in a dramatically improved spoke tension bearing capacity. Tests at the University of Bayreuth have attested our rims a spoke nipple pull-through resistance of five tons, with a good spoke barely being able to withstand 200 kilograms – that way our rims are not subject to any spoke tension limitations.


In addition our SBS technolgy (Seamless Brake Track) is employed as well which yields a seamless and virtually perfectly even and parallel brake track thanks to an elaborate manufacturing which results in a better modulation and braking characteristics.

In order to be prepared for the construction related thermal stresses from rim brakes the rims make use of a peak temperature laminate from Formula 1 racing that has specifically been developed for exhaust components of the chassis and is extremely heat-resistant.
Also the construction of the rim has been optimised for a preferably good heat dissipation by means of the fibre orientation as well as the invariably continuously running fibres. The rim is thereby being built using state-of-the-art-technology in a bladder moulding and thus does not feature an internal foam core that absorbs and collects heat and thus delays the cooling.


The rims have been tested at a renowned German testing institute in a practice-orientated and thermally monitored endurance test on the basis of simulations of continuous full brakings and pass descents of a 120 kg rider in alpine territory with the result that tires and tubes fail much sooner than the rims themselves which endured the test damage-free. Special brake pads ensure a safe deceleration under all conditions which is well above all well-established norms.
Tubular feeling, -safety and –weight with clincher wheels: A novelty – our ax-lightness U 45C!


All of our wheelsets are built to the tightest tolerances and with extremely high spoke tension by hand in our company in Creußen, Bayern, and individually checked before being able to call themselves a real ax-lightness wheelset:
An amount of work that is reflected in the final product and co-determines its extraordinary qualities!


Weight (+/- 5 %) 1195 g/set
Rims ax Ultra Road Clincher 45
Rim material Full Carbon
Tire type Clincher, tubeless
Brake type Rim brake
Rim depth 45 mm
Rim width 26 mm
Rim width internal 18 mm
Hubs Extralite CyberFront SP / CyberRear SP
Freehub Shimano/Sram, Campagnolo
Spokes DT Swiss Aerolite, black
Nipples Internal
Spoke tension front: 100 kgf, rear driveside: 140 kgf
Spoke count (f/r) 20 / 24
Decal colour white
Field of use Road
Rider weight limit 100 kg
Tire pressue limit 8 bar
Scope of delivery Brake pads, ax.Quicky evo Road quick releases, ax wheel bags

 Send to a friend Printable version


AX Lightness U 28 Clincher
AX Lightness U 24 Tubular
AX Lightness P 80 Tubular
AX Lightness P 55 Tubular
AX Lightness P 38 Tubular


Sepeda Kita
  Back to top
Back to top
© 2011 - 2017 Sepeda Kita
Developed by:

Sepeda Kita
Ruko PALMYRA Square
Jl. Jalur Sutera 25A No. 32
Alam Sutera, Tangerang 15325
Banten - Indonesia
Phone: (+6221) 2931 4986, 2931 5026
Mobile: (+62) 812 9573 6760